Skip to main content

How to construct knowledge graphs

In this guide we'll go over the basic ways of constructing a knowledge graph based on unstructured text. The constructured graph can then be used as knowledge base in a RAG application.

⚠️ Security note ⚠️​

Constructing knowledge graphs requires executing write access to the database. There are inherent risks in doing this. Make sure that you verify and validate data before importing it. For more on general security best practices, see here.

Architecture​

At a high-level, the steps of constructing a knowledge are from text are:

  1. Extracting structured information from text: Model is used to extract structured graph information from text.
  2. Storing into graph database: Storing the extracted structured graph information into a graph database enables downstream RAG applications

Setup​

First, get required packages and set environment variables. In this example, we will be using Neo4j graph database.

%pip install --upgrade --quiet  langchain langchain-community langchain-openai langchain-experimental neo4j
Note: you may need to restart the kernel to use updated packages.

We default to OpenAI models in this guide.

import getpass
import os

os.environ["OPENAI_API_KEY"] = getpass.getpass()

# Uncomment the below to use LangSmith. Not required.
# os.environ["LANGCHAIN_API_KEY"] = getpass.getpass()
# os.environ["LANGCHAIN_TRACING_V2"] = "true"
 ········

Next, we need to define Neo4j credentials and connection. Follow these installation steps to set up a Neo4j database.

import os

from langchain_community.graphs import Neo4jGraph

os.environ["NEO4J_URI"] = "bolt://localhost:7687"
os.environ["NEO4J_USERNAME"] = "neo4j"
os.environ["NEO4J_PASSWORD"] = "password"

graph = Neo4jGraph()

API Reference:

LLM Graph Transformer​

Extracting graph data from text enables the transformation of unstructured information into structured formats, facilitating deeper insights and more efficient navigation through complex relationships and patterns. The LLMGraphTransformer converts text documents into structured graph documents by leveraging a LLM to parse and categorize entities and their relationships. The selection of the LLM model significantly influences the output by determining the accuracy and nuance of the extracted graph data.

import os

from langchain_experimental.graph_transformers import LLMGraphTransformer
from langchain_openai import ChatOpenAI

llm = ChatOpenAI(temperature=0, model_name="gpt-4-turbo")

llm_transformer = LLMGraphTransformer(llm=llm)

Now we can pass in example text and examine the results.

from langchain_core.documents import Document

text = """
Marie Curie, born in 1867, was a Polish and naturalised-French physicist and chemist who conducted pioneering research on radioactivity.
She was the first woman to win a Nobel Prize, the first person to win a Nobel Prize twice, and the only person to win a Nobel Prize in two scientific fields.
Her husband, Pierre Curie, was a co-winner of her first Nobel Prize, making them the first-ever married couple to win the Nobel Prize and launching the Curie family legacy of five Nobel Prizes.
She was, in 1906, the first woman to become a professor at the University of Paris.
"""
documents = [Document(page_content=text)]
graph_documents = llm_transformer.convert_to_graph_documents(documents)
print(f"Nodes:{graph_documents[0].nodes}")
print(f"Relationships:{graph_documents[0].relationships}")

API Reference:

Nodes:[Node(id='Marie Curie', type='Person'), Node(id='Pierre Curie', type='Person'), Node(id='University Of Paris', type='Organization')]
Relationships:[Relationship(source=Node(id='Marie Curie', type='Person'), target=Node(id='Pierre Curie', type='Person'), type='MARRIED'), Relationship(source=Node(id='Marie Curie', type='Person'), target=Node(id='University Of Paris', type='Organization'), type='PROFESSOR')]

Examine the following image to better grasp the structure of the generated knowledge graph.

graph_construction1.png

Note that the graph construction process is non-deterministic since we are using LLM. Therefore, you might get slightly different results on each execution.

Additionally, you have the flexibility to define specific types of nodes and relationships for extraction according to your requirements.

llm_transformer_filtered = LLMGraphTransformer(
    llm=llm,
    allowed_nodes=["Person", "Country", "Organization"],
    allowed_relationships=["NATIONALITY", "LOCATED_IN", "WORKED_AT", "SPOUSE"],
)
graph_documents_filtered = llm_transformer_filtered.convert_to_graph_documents(
    documents
)
print(f"Nodes:{graph_documents_filtered[0].nodes}")
print(f"Relationships:{graph_documents_filtered[0].relationships}")
Nodes:[Node(id='Marie Curie', type='Person'), Node(id='Pierre Curie', type='Person'), Node(id='University Of Paris', type='Organization')]
Relationships:[Relationship(source=Node(id='Marie Curie', type='Person'), target=Node(id='Pierre Curie', type='Person'), type='SPOUSE'), Relationship(source=Node(id='Marie Curie', type='Person'), target=Node(id='University Of Paris', type='Organization'), type='WORKED_AT')]

For a better understanding of the generated graph, we can again visualize it.

graph_construction2.png

The node_properties parameter enables the extraction of node properties, allowing the creation of a more detailed graph. When set to True, LLM autonomously identifies and extracts relevant node properties. Conversely, if node_properties is defined as a list of strings, the LLM selectively retrieves only the specified properties from the text.

llm_transformer_props = LLMGraphTransformer(
    llm=llm,
    allowed_nodes=["Person", "Country", "Organization"],
    allowed_relationships=["NATIONALITY", "LOCATED_IN", "WORKED_AT", "SPOUSE"],
    node_properties=["born_year"],
)
graph_documents_props = llm_transformer_props.convert_to_graph_documents(documents)
print(f"Nodes:{graph_documents_props[0].nodes}")
print(f"Relationships:{graph_documents_props[0].relationships}")
Nodes:[Node(id='Marie Curie', type='Person', properties={'born_year': '1867'}), Node(id='Pierre Curie', type='Person'), Node(id='University Of Paris', type='Organization')]
Relationships:[Relationship(source=Node(id='Marie Curie', type='Person'), target=Node(id='Pierre Curie', type='Person'), type='SPOUSE'), Relationship(source=Node(id='Marie Curie', type='Person'), target=Node(id='University Of Paris', type='Organization'), type='WORKED_AT')]

Storing to graph database​

The generated graph documents can be stored to a graph database using the add_graph_documents method.

graph.add_graph_documents(graph_documents_props)

Was this page helpful?


You can leave detailed feedback on GitHub.